BBC Flash Dryer - 24x24in, 240 Volts, 4948 Watts (No Stand Included)
Our most powerful 24x24" flash, this flash is a great way to expand your flash area and decrease your flashing times! Be sure that your breaker can handle 208v on a 30 amp circuit.
Black Body Flashes have been known as "industry standard" for flash curing inks on textiles and other substrates. The heater includes a 10 ft. power cord with plug, an on/off switch and a power indicator light.
Step One: Identify the power source you have available, 120V or 240V. Keep in mind that a typical household has a 120V oulet rated at 15 amps. Check with your electrician if you have questions about your power lines and power outlets.
Step Two: Identify the size of your platen. Typical sizes are 14", 16", and 20."
Step Three: Chose a nominal element size(hot face) at least 2" larger than your platen. This will best assure you can flash your largest image.
Step Four: Decide how fast you want to flash your impressions. A higher wattage heater has more power, meaning that it will get hotter and flash faster.