IC 7100 Low Cure Poly Columbia Blue Plastisol Ink - Gallon

$99.99


SKU: # IKPL-7160LF-G
$99.99
» View Availability and Shipping Map
Ever had issues screen printing on cotton/polyester blends, 100% polyester or stretchable poly fabrics? These types of garments are difficult to print due to dye migration caused by the polyester fabric heating up and releasing its dye into the ink which will change the inks color. To add to the problem, traditional poly-blocking inks are very thick and hard to work. Ryonet‘s 7100 Performance Series from International Coatings is a low-bleed, non-phthalate, low fusing, fast flashing, low tack, plastisol based polyester printing ink that will take your athletic screen printing to the next level. With the 7100 Series you can print easier, cure at a lower temperature, and have confidence your ink will block dye transfer.
Application:

7100 Series should be used straight from the container without any modifications. Stir well before use. If thinning is required use 1% - 5% by weight Curable Reducer. Using reducers or additives may lower the bleed resistance, opacity and/or stretch.



Squeegee:

70 Durometer squeegee with sharp edge.



Mesh:


Best if used on mesh counts 110 - 305



Emulsion:

Use either HiFi Emulsion, DXP or any standard plastisol emulsion.



Cure Temperatures:


Ink must be heat set at 285° F to 300° F. Test dryer temperatures and wash test printed product before and during production run.



Clean Up:

Use Environmentally friendly screen wash to easily remove from screens and tools.

Compare to: Wilflex Epic Top Score Columbia Blue

No reviews available

Be the first to Write a Review