IC Optilux Reflective Plastisol Ink with Coupler - Quart

$119.99


SKU: # IKPL-505-Q
$119.99
Optilux™ 505 Ultra Reflective Plastisol is an easy to print, two-part, retro-reflective ink that contains light-reflecting microspheres. When a garment printed with Optilux™ 505 ink is exposed to a focused beam of light, such as that from a flashlight or an automobile headlight, it reflects or returns light back to the light source.
Ink Preparation

Optilux™ 505 ink must be mixed thoroughly with Optilux™ 100 Coupler before printing in order to obtain best wash and wear durability. Optilux™ 100 Coupler is provided in 2 fluid oz. (60 ml) and 8 fluid oz. (250 ml) containers. Stir thoroughly into the Optilux™ 505 ultra reflective ink prior to use. The recommended proportions are:



By weight: 20 grams of ink to 1 gram of Optilux™ 100 Coupler.

Pot life of mixed ink is approximately 8 to 12 hours. Do not mix more ink than is needed for the job. Any mixed ink not used within 12 hours should not be used again.

Screen Application

Use 160 t/in to 230 t/in (63 t/cm to 90 t/cm) Monofilament. Printing through a coarser mesh may reduce the reflective quality of the ink.

Use a 110 t/in to 160 t/in (43 t/cm to 63 t/cm) for an underbase prints on tightly woven fabrics.



Use any direct lacquer resistant emulsion or capillary film.



Squeegee


60-70 Durometer: Sharp Edge



Ink Cure Temperature


325°F (163°C) entire ink film. Test dryer temperatures and wash test printed product before and during a production run.



Clean Up


Mineral Spirits or any environmentally friendly plastisol screen wash.

No reviews available

Be the first to Write a Review