IC 7100 Low Cure Poly White Plastisol Ink - 5 Gallon

$449.99


SKU: # IKPL-7113LF-5G
$449.99
Ever had issues screen printing on cotton/polyester blends, 100% polyester or stretchable poly fabrics? These types of garments are difficult to print due to dye migration caused by the polyester fabric heating up and releasing its dye into the ink which will change the inks color. To add to the problem, traditional poly-blocking inks are very thick and hard to work. Ryonet‘s 7100 Performance Series from International Coatings is a low-bleed, non-phthalate, low fusing, fast flashing, low tack, plastisol based polyester printing ink that will take your athletic screen printing to the next level. With the 7100 Series you can print easier, cure at a lower temperature, and have confidence your ink will block dye transfer.
Preparation

Screens must be coated with a plastisol or hybrid emulsion to prevent stencil breakdown on press. Post-hardening the stencil is recommended for long print runs. If thinning is required, mix curable reducer at 1-5% by weight. Adding reducers may reduce bleed resistance or opacity.



Application

Print wet-on-wet without flash curing. Degree of color/wash fastness is dependent on proper curing.



Mesh

156 to 305t/in. The mesh count being used will determine how much squeegee pressure should be used.



Squeegee

60-80 Durometer or 70/90/70 triple durometer. Typically heavy squeegee pressure is preferred.



Emulsion

Use RXP, HiFi or any standard plastisol emulsion.



Cure Instructions

285-300 degrees. Test dryer temperatures and perform a wash test prior to beginning production run.



Clean Up

Plastisol Screen Wash such as Citra Paste. You may use mineral spirits sparingly, as it my break down screen adhesive.



HMIS

H (1) F (1) R (0) P (B)



Storage

Store in cool dry place. Elevated temperatures thicken product and shorten useful life.

Compare to: Epic Top Score White

No reviews available

Be the first to Write a Review