IC 764 Pro-Brite Process Cyan Plastisol Ink - Gallon

$45.00 $54.99   18% Off


SKU: # IKPL-764LF-G
$45.00 $54.99   18% Off
» View Availability and Shipping Map
The International Coatings (IC) MP and Pro-Brite Process plastisol inks are recommended for use in four color process. We also have water based process inks by Matsui, which are part of our Enviro inks. Process inks are transparent in nature and meant to mix together for a four color process image not to be printed separately. Pro-Brite Process inks are unique to IC, are a little more opaque than standard process inks and work great on automatic presses. Water Based Process ink is great for the ultimate soft hand on the shirt and is typically thought of as more environmentally friendly. We also recommend having curable reducer on hand during process printing in case one of the colors needs to be slightly adjusted.



Download CMYK Color Profiles for Photoshop and Corel Here
Preparation

Screens must be coated with a plastisol or hybrid emulsion. Post-hardening the stencil is recommended for long print runs. If using with a pigment system, mix in pigment at the desired shade or level. 1-10% is normal for standard pigments and up to 20% for fluorescent pigments. You may mix in Curable Reducer to help thin the ink at a mix ratio of 1-25% by volume. Adding reducers may reduce the opacity of the ink.



Application

Print wet-on-wet without flash curing. Degree of color/wash fastness is dependent on proper curing.



Mesh

36 to 305t/in. The mesh count being used will determine how much squeegee pressure should be used.



Squeegee

60-80 Durometer. Can also use 70/90/70 triple durometer squeegees. Typically heavy squeegee pressure is preferred.



Emulsion

Use RXP, HiFi or any standard plastisol emulsion.



Cure Instructions

325°F through the entire ink film. Test dryer temperatures before a production run. Wash test printed product prior to beginning production run.



Clean Up

Plastisol Screen Wash such as Citra Paste. You may use mineral spirits sparingly, as it my break down screen adhesive.



HMIS

H (1) F (1) R (0) P (B)



Storage

Store in cool dry place. Elevated temperatures thicken product and shorten useful life.

No reviews available

Be the first to Write a Review