RyOpaque Lemon Yellow Plastisol Ink - Gallon
Screens must be coated with a plastisol or hybrid emulsion. Post-hardening the stencil is recommended for long print runs. If using with a pigment system, mix in pigment at the desired shade or level. 1-10% is normal for standard pigments and up to 20% for fluorescent pigments. You may mix in Curable Reducer to help thin the ink at a mix ratio of 1-25% by volume. Adding reducers may reduce the opacity of the ink.
Print wet-on-wet without flash curing. Degree of color/wash fastness is dependent on proper curing.
36 to 305t/in. The mesh count being used will determine how much squeegee pressure should be used.
60-80 Durometer. Can also use 70/90/70 triple durometer squeegees. Typically heavy squeegee pressure is preferred.
Use RXP, HiFi or any standard plastisol emulsion.
325°F through the entire ink film. Test dryer temperatures before a production run. Wash test printed product prior to beginning production run.
Plastisol Screen Wash such as Citra Paste. You may use mineral spirits sparingly, as it my break down screen adhesive.
You may mix in Curable Reducer to help thin the ink at a mix ration of 1-25% by volume. Adding reducers may reduce the opacity of the ink.
See MSDS sheet for Emergency and First Aid Procedures
H (1) F (1) R (0) P (B)
Store in cool dry place. Elevated temperatures thicken product and shorten useful life