Ryonet Dual Leg and Sleeve Platen No Bracket - 12x26in
- Print Two Sleeves At Once
- Dual 19.5" x 3.5" Print Area
- Works w/ 23x31" Screens
- 20x24" Screens work for on a smaller work area but not the whole pallet.
- Easily load 1 or 2 garments (load sleeve first or neck first see below.
- Works great on pants or shorts.
- Made in the USA from quality MDF coated with white laminate for heat resistance. Routed and sanded for smooth rounded edges.
Useless for water based printing
by Eric -
I bought this hoping to print 2 sleeves at a time (1 color) with the DIY press from Ryonet. I found it to be pretty much useless for water based printing, as it is impossible to get something with wet ink off without screwing up the print. The metal on the bottom side is about a 1/4", just enough to make getting a fitted shirt (Bella/Canvas) on or off the platen difficult.