BBC Flash Dryer - 18x18in, 240 Volts, 2708 Watts with Rotating Stand and Casters
This flash dryer is typically used without heat controls by raising and lowering the flash unit to achieve different heat levels. However, there is an additional heat option available to give you larger range of heat curing and print options. Controls line voltage from 0-100%.
Step One: Identify the power source you have available, 120V or 240V. Keep in mind that a typical household has a 120V oulet rated at 15 amps. Check with your electrician if you have questions about your power lines and power outlets.
Step Two: Identify the size of your platen. Typical sizes are 14", 16", and 20."
Step Three: Chose a nominal element size(hot face) at least 2" larger than your platen. This will best assure you can flash your largest image.
Step Four: Decide how fast you want to flash your impressions. A higher wattage heater has more power, meaning that it will get hotter and flash faster.