CCI Re-Stor Liquid Haze Remover
This product is a viscous ghost/image stain remover that is designed for a variety of inks. RE-STOR completely cleans mesh of stains with less noticeable odor and works better than most paste stain removers.
- Before using RE-STOR, remove all ink residue and emulsion from the screen.
- Brush product on the ink side of a wet screen. Agitate both sides of the screen with a brush or pad and then set aside for approximately 3 to 8 minutes.
- High pressure water rinse, spraying from the bottom to the top, on the print side of the screen. Reverse screen and high pressure rinse. Allow screen to dry.
AVAILABLE SIZES: 1 QT. CONT., 4x1 QT. CASE, 5 GAL., 55 GAL. DRUM