Approximate Pantone® Value: 1807U
The first water based substance found on the red planet by explorers. Truly the first of its kind, Green Galaxy's Mars Red water based ink is piercing red and ready for use right out of the bucket. Mars Red is specially formulated to stay wet while printing, cover fabric, and wash extremely well. Not only is it easy to use but it feels amazing on the garment and can even be printed on uncoated paper for poster printing. After a day of printing, simply clean Mars Red with water and scoop the left over ink back into the container where it will rejuvenate itself overnight.
Ready-to-use water based ink for screen printing on fabrics. Can be printed on polyester or dye migrating fabrics with optional use of Green Galaxy™ Warp Drive low cure catalyst.
Can be used with any mesh between 156-305.
We recommend using a water-resistant emulsion like Baselayr Complete. It is recommended to degrease your screens with Baselayr Emulsion Prep. For extended screen life and long print runs it is recommended to post expose the screens and/or use an emulsion hardener like Baselayr Emulsion Hardener.
This product can be mixed with other Green Galaxy™ HSA Water Based Inks.
Load screen with plenty of ink. Flood screen prior to printing. Green Galaxy™ HSA Water Based Ink can be printed with a push or pull squeegee stroke. After printing, flood screen allowing ink to sit on top of image to avoid drying. If screen clogs or exhibits dry ink in the print, re-flood and aggressively print again, this should clear the screen. If it does not clear the screen, spray a small amount of warm water into the stuck areas of the screen and wipe out with a rag. If you are leaving your screen for an extended period of time be sure to leave your screen flooded completely. If your ink begins to scale over, spray with water to rewet ink. Green Galaxy™ HSA Water Based Ink can be printed with other water based inks and with plastisol inks.
For flashing, forced air flash is optimal. Flash until dry to the touch.
Printing on an under base:
Green Galaxy™ HSA Water Based Ink colors can be printed on top of Green Galaxy™ Comet White, or discharge under base. Ensure that the under base is properly flashed so that it is dry before printing color on top. Perform wash test to ensure inner layer adhesion.
Printed fabric should be cured for a minimum of 90 seconds at 360°F. Ideally, printed fabric should be cured for three minutes at 300-320°F.
After printing, perform a stretch test to ensure elasticity. It is always recommended to perform a wash test to ensure proper cure prior to going into production. You may also run abrasion testing to watch for flaking and test adhesion. Increase cure dwell time if testing fails.
Ink should be removed from screen as soon as printing is completed. General wash-up (on ink that has not dried) can be done with water, though using Sgreen™ Aqua Wash is much easier and recommended. For aggressive or dried screens, use Sgreen™ Aqua Wash to dissolve ink and blast out areas of dried ink with water pressure.
Keep container(s) tightly closed. Store in cool, well-ventilated location that is locked.
General Safety Precautions:
Do not breathe vapors. Wear protective gloves. Do not eat, drink or smoke when using product. Wash hands thoroughly after handling. Dispose of this product in accordance with local, regional, national and international regulations as specified.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Bought Together
- Best Red
- pitch black
- Comet White
- Green Galaxy
- customer service
Best Red. This is actually a pretty red and screen prints great.
Love this collection
Hello Screen Printer! We appreciate the love for the Green Galaxy INKS. Happy printing!
Best Ink Out There
We use Green Galaxy for almost everything and highly recommend their products! They leave an amazing print and are easy to work with.
Hello and thank you for taking the time to leave a review! We love this ink too - so happy to hear it's meeting your expectations! Happy Printing! April w/ Ryonet
Great For Beginners
I am a beginner at print screening this water based ink is amazing! Easy to use and easy to clean up! After trying this one I had to buy comet white and pitch black as well!
Hello Fabian - that's fantastic! Green Galaxy inks are fun and easy to use, so glad you are enjoying them! Are you using any warp drive with it? Brings the cure temp down to 170degrees which is like buying insurance for your prints - water-based inks are difficult to cure without forced-air dryers. Check out our water-based ink online courses as well -good info in those :-). HAPPY PRINTING! - April S.
If worked very well for our tshirts
Hi Screen Printer! Yay, yay, yay! We're so glad our Green Galaxy Mars Red worked out well for you! We pride ourselves on our Green Galaxy line, and appreciate you letting us know we're on the right track :) You're great! Sincerely, Kayli B