- Doubles as a ready-to-use plastisol ink and as an ink mixing system.
- Its low cure property speeds up production while decreasing electrical costs.
- The ink has high opacity, producing bright, vivid prints while maintaining a soft-hand feel.
FN-INK™ helps screen printers that don’t have a lot of extra time or money get the most effective and economical plastisol inks, bolstering productivity and saving money in the process.
FN-INK™ is a non-phthalate, ready to use plastisol ink that works great right out of the bucket, and is not a big financial hit to the ole wallet. FN-INK™ was designed by screen printers, for screen printers to be easy to work with. The FN-INK™ line includes 15-ready-to-use colors.
The fact that FN-INK™ easily cures at lower temperatures (260 degrees), means shops can see real gains in production. Financially Necessary Ink was manufactured to be a great ink at a great retail price, day in and day out. Giving printers the peace of mind that their hard earned dollars are getting the best ROI with this FN-INK™.
Did you know that the classic line makes up the FN-INK™ Mixing System? Browse the mixing software to see what colors you can unlock.
- Bold and vibrant colors.
- Creamy & Easy to Print Inks.
- Soft hand prints.
- Limited wet-on-wet printing.
- Short flash times, lower cure temperature.
For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print using lower mesh screens.
Flash at 180-200°F, for 3 - 5 seconds. Each shop’s operating parameters might be faster or shorter depending on your production variable. Cure at 260°F, the ink is cured when it hits 260 throughout the entirety of the ink layer.
If you are able to keep temperatures low in your dryer and hit cure temp* closer to 260°, you can keep the dyes in the polyester fabrics from bleeding into your inks. To briefly summarize why this happens, most polyester fabric’s dye/temperature is set between 270°-300°. When the polyester thread hits the temperature range again, the dyes return to a gaseous state and are absorbed by the plastisol inks. This is why there are low bleed inks on the market.
But as stated above, if you can cure your ink below the bleed point of the polythread, you do not have to worry about dye migration!
*Cure is attained when the ENTIRE ink layer reaches 260°, meaning that the ink is 260° from the top to the bottom of the ink layer. If you are using a laser gun to read the surface temp, this WILL be misleading. Laser temp guns give you a reflective reading. When tested side-by-side with a donut probe, you will see temperature differences as great as 120°-150° early in the cure cycle (the donut probe accurately measures the contact temperature where the crosshairs reside). As you reach the end of the dryer, those temperatures will get closer together. As a direct result – you will need to read a surface temp as little as 60° above what stated cure temp is and as much as 100° depending on how short your dryer tunnel is and how hot your settings are. This is due to a few things:
- The rate that plastisol ink absorbs heat. Some colors will heat up faster than others as they absorb infrared heat waves more readily.
- How hot the ink is when entering the tunnel. Cooler inks will take longer to heat up, thus taking longer to reach cure.
- The thickness of your ink deposit. As we all know, thicker ink deposits take longer to cure than thinner ink deposits. A longer dwell time is needed to reach full-cure through the whole ink layer. Heat/IR waves take time to penetrate and heat up the ink.
- The length of your tunnel. Curing ink is about temperature and time. It takes time for the entire ink layer to heat up and reach cure temp. The faster and hotter you run, the greater your chance to not reach full cure temp at the bottom of the ink layer.
- Cotton garments take longer to heat up compared to polyblends or 100% polyester. This is due to the absorptive nature of cotton. Cotton soaks up and holds onto water. When putting the shirt through the dryer, the dryer will release the water in the cotton fibers, slowing down how fast ink heats up. This process directly relates to how water based ink heats up and reaches cure, just on a smaller scale.
- The quality of your infrared panels. IR Panels are not created equal. Without diving into the deep details, some panels are more efficient in creating heat within the ink layer than others.
When changing your dryer to low cure temps, follow the recommendations and parameters laid out above and do wash testing to ensure your new dryer settings are reaching full cure.
Ink degradent or press wash.
Store at 65-90°F (18-32°C), avoiding direct sunlight. Ideal when used within one year of manufacturing date.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Bought Together
- ink quality
- dye migration
If I could I would give this product 0 stars. This ink completely messed up my entire run of shirts. It left an oil stain of the design all over the front of the shirts that will not wash out (I have tried). I have used the same shirts for 10 years so I know it is not a shirt problem. I used to use Lava by Wilflex which worked great, unfortunately ScreenPrinting.com got rid of pretty much all ink except for FN-Ink. Seems like they sold out to China and only carry inferior inks now. On top of paying $85.95 (On sale) for a gallon of inferior ink, I now get to pay $121.68 to replace the wholesale value of all of the shirts.
Hello, Thank you for reaching out and leaving us a review on your recent purchase of FN-INK Golden Yellow. We have reached out to you directly through a case and hope to support you further there. Thank you Ryonet Team.
Didn't like this ink on Dark Garments at all..
Hey Screen Printer! We appreciate your review! We can offer support if you would like, we would like to hear more about why you did not care for it on dark garments. Please reach out at email@example.com! Thanks, The Ryonet Team
Can’t be beat!
Perfect for all kinds of applications..nice and smooth application and cures quick!
Hi Cody! Thanks for leaving this review -we very much appreciate it and love hearing that the ink is working well for you. Happy Printing! -April w/Ryonet
Not as good
This is not as good as the Wilflex brand. No where near the same opaque as Wilflex. I will not purchase this again. And to make things worse, you don't have any Wilflex.
Hey Jerry, Thank you so much for taking the time to leave us this review, and for your feedback. We take this to heart, and truly apologize this did not meet expectations. The FN was created by our company specifically for our customer base, and although it doesn't appear to have the same level of opacity, it does provide true colors you can rely on. The formulation is different from the Lava line - Wilflex includes white and opacity boosters that are unique to their company. Regarding our discontinuation of the Lava line, we are keeping the Perfect White, Black, Kelly Green, Royal Blue, Really Red, and Lemon Yellow as we are making room for Wilflex's ready-to-use line of Rio colors. We hope to have this as we get closer to Spring of the new year. We sincerely apologize as we understand this is a very beloved line of inks, but hope we can help you find another ink that will work for your needs! If you want any assistance with this, or have any further questions on the FN inks vs Lava, please feel free to reach us by phone, chat, or email! Our whole team is ready and happy to serve :) Thank you, Kayli B