- FN-INK™ Metallic Gold can be printed on its own or mixed with other colors, so printers can add a sparkling effect to any print.
- The metallic ink maintains the soft-hand feel printers have loved with the FN-INK™ line.
- It's a vibrant, glimmering ink that'll make a print stand out from the rest.
Make a print shimmer with FN-INK™ Metallic Gold. It’s a low cure metallic ink that can be printed directly to fabric, printed over an underbase, and mixed with other colors.
FN-INK™ Metallic Gold is a low cure ink. However, the flakes will reflect heat when cured in an electric dryer, which slows down the cure process. Proper wash testing should be performed to ensure cure parameters are optimal before running any production.
FN-INK™ Metallic Gold is not a low bleed ink. If printing on a poly or poly blended garment, please consider using a low bleed underbase.
Unlock specialty printing today with FN-INK™ Metallic Gold.
- Vibrant & glittery
- Easy to work with
- Soft hand prints
- Can mix with other colors
RECOMMENDATION FOR USE
Printing direct to fabric: Lower mesh counts will be best if printing FN-INK™ Metallic Gold directly to fabric. 86 or 110 mesh is recommended, but printers can go up to 156 standard mesh if needed. If using thin thread mesh, 110-156 mesh will work great.
If you are printing over a base white or another color: Use 156 mesh or higher to better control the ink deposit. If using thin thread, you can print through up to 230 mesh.
Some designs will require the use of higher mesh counts. Do not exceed 230 thin thread mesh screens. It is recommended to print FN-INK™ Metallic Gold over either a clear or color underbase or a white base. A white base will give the gold a brighter appearance.
Adding color to gold: There is no limit on how much ink you can add to FN-INK™ Metallic Gold. You can add 10%-20% of a color to gold to give it a tint. You can also add the gold to a color at 10%-20% to create a slight sparkle effect. For example, adding 20% of gold to Black FN-INK™ creates a subtle, shimmery effect that works well as a background color.
All gold flake inks will introduce a gold color value (a red, yellow, black tint) to the ink. As a result, not all colors will look the way you may want or expect. For example, adding Bright Red to Gold at 20% will create a brown shade of ink. While it is suggested to use complimentary colors when tinting FN-INK™ Metallic Gold, the ratios may need to be adjusted to match expectations. Test new colors thoroughly before starting production.
*Some colors are inherently translucent and any addition of a clear additive will create a loss of opacity or coverage.
STENCIL & EMULSION GUIDELINES
Any emulsion works with FN-INK™ Metallic Gold.
Mesh Counts for Direct to Fabric
- Standard Mesh: 86-156
- Thin Thread: 110-156 (Thin thread will look and print the best.)
Mesh Counts for Over an Underbase
- Standard Mesh: 156-180
- Thin Thread: 156-230 (Thin thread mesh will look and print best.)
Be sure to stir the product prior to use. Stir thoroughly. Print and perform a wash test before production.
The ink is ready to print right out of the container, no modification is necessary. If desired, you can modify it with a curable reducer at up to 5% by weight. If greater stretch is required for troublesome garments, add FN-INK™ Stretch starting at 5%. Add more if greater stretch is desired.
Use a 70 durometer or a 65/90/65 squeegee blade to produce an even print with enough flake deposit. Using a blade that is too soft will not properly shear the ink. A squeegee with a stiffer, harder blade will shear a thinner ink deposit.
When possible, do a flood print. The flood stroke will pre-fill the stencil and make it easier to fully clear the ink and flake from the screen. It’ll make a smoother ink deposit.
Even though FN-INK™ Gold is a low cure ink, it can reflect heat in electric dryers, which means the metallic ink takes longer to cure compared to the classic line of FN-INK™. Increase the dwell time (retention time in the conveyor dryer) or the temperature to ensure the ink reaches full cure.
TESTING & PRECAUTIONS
When testing cured ink, perform a wash test to ensure proper cure prior to going into production. If the gold prompts any issues after a wash test, then the metallic ink did not reach full cure.
Use any press wash to clean it up.
Keep container(s) tightly closed. Store in a cool, well-ventilated location out of direct sunlight.
PRODUCT DATA SHEETS
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Bought Together
- specialty inks
This stuff is gold.
We used this FN gold through a 230 mesh on blended garments, this ink really shines in the sun. We are still experimenting with the different custom colors that can be achieved. Thanx Ryonet.
Hey David, Thanks for the RAD review for the FN-INK Gold. Glad you shared some cool photos of your work, And really glad you took advantage of mixing your own colors! Feel free to share pics of your work anytime, thanks again! Happy printing :)
First attempt on a print and worked beautifully. As a beginner the easier the better and this was perfect.
Hi Alex! Great review, thanks for taking the time to share some feedback on your experience. Glad you love it and recommend for others! happy printing :)
Metallic gold ink.
This product is really good, Love how it turned out on the shirts. Will definitely buy more.
Awesome opacity and easy to print
Honestly I usually just use HTV for metallic colors but this was so easy to work with that I will confidently start using it more. I printed 2 jobs almost immediately after receiving the quart, one that used an under base and one that did not. Both were super smooth through a 125 mesh and the metallic effect translated well. It was thin enough that mixing was easy but not too thin to print with. I was worried about "flakes" or anything else that gives it the metallic-ness (probably a new word) but honestly it was an even, flat print. Looking forward to what else they release for specialty inks.
Jason - We appreciate you taking the time to leave us such a positive review! We are so glad that you are loving the FN inks! We cant wait to see what you will print next! Thanks & Happy Printing Ryonet Team