CCI Micro Wash Dip Tank Emulsion Remover and Ink Degrader - 5 Gallon Pail
This 2 in 1 Emulsion Remover and Ink Degrader Dip Tank Solution concentrate mixes 1 part micro wash to 10 parts water.
To use efficiently you must remove all bulk ink from the screen, only leave ink residue and not clumps of ink. Leaving bulk ink on your screen will decrease the lifespan of your solution. Micro-Wash II is a water soluble, drain safe emulsion remover formulated for the removal of emulsion, ink residue and some ghost images.
This solution will have a life span of around 6-8 months in your dip tank (this will vary depending on how many screens you process). Follow the directions on the container to fill your dip tank depending on how big your dip tank is, fill the rest with water and you are ready to clean some screens!
Dilute up to 1:5 with water. Card excessive ink from screen. Apply MICROWASH II solution to both sides of screen, then scrub with a non-abrasive pad or brush until ink is liquefied. Dip pad or brush in water prior to scrubbing the screen. Allow to dwell for 10-30 seconds for best results. High pressure water rinse. By washing from the bottom to the top, you will prevent the possibility of any ink or emulsion locking itself back onto the mesh when it comes in contact with the rinse water.
SOAK TANK APPLICATION
Dilute up to 1:10 with water. Card excess ink from screen. Allow screen to soak in MICROWASH II solution for 3-10 minutes. High pressure water rinse. By washing from the bottom to the top, you will prevent the possibility of any ink or emulsion locking itself back onto the mesh when it comes in contact with the rinse water.