Sgreen Stripper Emulsion Remover
Sgreen® Emulsion Stripper is an environmentally conscious, iodine-based emulsion stripper, specifically formulated to cut through oils to degrade and remove emulsion quickly. Used in concentrate or diluted form, SGREEN® STRIPPER will economically and safely remove all types of photopolymer, diazo, and capillary film emulsions without etching.
This product is concentrated.
1. Remove any ink residue, block-out, or tape, then flush the screen with water.
2. Apply SGREEN® EMULSION STRIPPER by spray, brush, or dip tank application. Use in concentrated form or dilute 1:3 ratio with water.
3. Allow SGREEN® EMULSION STRIPPER to penetrate the emulsion. Assist with a mesh-friendly scrub pad as needed. The recommended duration before rinsing is approximately 30 seconds. Thoroughly rinse screen with high-pressure water making sure to remove all emulsion and residue.
4. Do not allow SGREEN® EMULSION STRIPPER to dry on screen. Dried stripper will chemically lock the emulsion making it very difficult to reclaim the screen.
Store away from direct sunlight and heat. Do not freeze.
General Safety Precautions:
Keep out of reach of children. Mild acidic material. Do not take internally. Avoid contact with eyes. Wash thoroughly after handling.
FIRST AID: Eyes Flush for 15 minutes, seek medical attention if irritation persists.
Swallowed: Drink large quantities of water and get immediate medical attention.
Skin: Wash with soap and water, seek medical attention if irritation occurs.
FOR INDUSTRIAL USE ONLY: Non-flammable. Degrades naturally in environment.