CCI TX Discharge Emulsion
Shipping Transit Time
Availability is based on available stock info, and may be affected by order volumes.
ProChem® TX-DISCHARGE is a high viscosity Diazo Sensitized Pure-Photopolymer Emulsion recommended for plastisol, water-based, and discharge inks.
ProChem® TX-DISCHARGE has excellent water resistance. Diazo is added normally, first by adding room temperature water, agitating, and then adding the solution to the emulsion. Allow the emulsion to stand for at least 2 hours to ensure any air bubbles introduced during mixing are released.
NOTE: This emulsion comes with a bottle of Diazo.
Diazo sensitized emulsion for Plastisol, Discharge, Water Based inks.
- Red Colored
- Extremely Durable for long print runs
- 47% solids
Handle under yellow safelight conditions. Sensitizing Mix sensitizer according to the instructions on the bottle. Pour the solution into the emulsion and mix thoroughly. Let the emulsion stand for 2 hours to let the air bubbles release from the emulsion.
It is important to have a clean dry screen before you apply the emulsion. To achieve this use a good degreaser available from CCI.