CCI HR-30 Screen Wash
Shipping Transit Time
HR-30 is a water soluble screen wash designed for the removal of all inks, including plastisol and UV inks. HR-30 works especially well on tough inks such as water based, vinyl epoxy and enamels and can also be used for the removal of haze or ghost images.
Manually card excessive ink from the screen. Spray or apply manually to the ink side of the screen. Agitate both sides of the screen with a non-abrasive brush or pad and allow product to penetrate. Starting at the bottom of the screen, rinse off all residue with high pressure water.
Recirculating: Card excessive ink from the screen. HR-30 can be continuously re-circulated until product becomes too heavily soiled with solids. Used product may be filtered and reused.
Haze and ghost image remover: Remove the ink and emulsion from the screen. Spray or apply manually to both sides of the screen. Scrub both sides of the screen with non-abrasive brush or pad. Allow product to remain on the screen for a minimum of 3 minutes. Starting at the bottom of the screen, high pressure water rinse both sides of the screen.