R2O CMS Water Based Rhodamine Red Water Based Pigment
Shipping Transit Time
Availability is based on available stock info, and may be affected by order volumes.
correct color matches. When combined with a general purpose base or Discharge base, the result is bright, vivid colors with an amazingly soft feel. When printing on white 100% cotton fabrics the cost per print is less than that of plastisol. This is a PVC free pigment system designed for printing on 100% cotton fabrics. Perfect for an expanding screen printing shop, the R2O CMS Pigment Mixing System will give you flexibility to offer your customers a super soft retail type print with the color match of their choice!
Screens must be coated with a water-resistant emulsion to prevent stencil breakdown on press. Post-hardening the stencil is recommended for long print runs. Mix 10% pigment to 90% base or mix according to pantone formulations provided in our mixing software. We recommend using Water Base and Discharge Reducer/Retarder to thin and slow down the air drying process of the ink.
Print wet-on-wet without flash curing. Misting the on-press screens occasionally with water during long print runs is helpful. Degree of color/wash fastness is dependent on proper curing.
156 to 305t/in. The mesh count being used will determine how much squeegee pressure should be used.
60-80 Durometer or 70/90/70 triple durometer. Typically heavy squeegee pressure is preferred.
Use WBP or any standard water based emulsion
Minimum of 90 seconds at 320°F. Ideally for 2-3 minutes at 340-350°F High volume forced air is recommend during curing. Proper curing is extremely important. For fast and easy curing, take a look at our conveyor and flash dryers.