Use Code: BFCM20 & Save $20 Off Your Order Over $200+

Free Shipping in the Contiguous US Learn More

Use Code: NINJA & Save 20% Off Your First Order Of Transfers

SAVE $20 ON ORDERS OF $200+

BFCM20

Sgreen Ink Degrader Plastisol Ink Remover

Sgreen  |  SKU: CMEV-SF-SID-Q
us-dollar
Use Code: BFCM20
Save $20 Off Your Order Above $200 | Valid Only On Select Products Thru 12/01

Size
$26.95
2.1 lb
Flat rate
multi-qty message
In stock
DESCRIPTION

Sgreen® Ink Degrader is an all natural soy based Eco-Friendlier™ plastisol ink degrader, designed to remove difficult inks during your screen cleaning process without affecting the emulsion. It is safe enough to use in your washout sink, washing away difficult inks when mixed with water and agitated with a brush. You can also use Sgreen® Ink Degrader in a recirculation system for the most economic use. Sgreen® Ink Degrader works hard to dissolve plastisol and other difficult inks without harming you or the earth.

CHECK OUT THE SGREEN PRODUCT CATALOG

BENEFITS
  • Eco-friendly chemicals that are safer for a printer's health, pipes, and environment.
  • Powerful chemistry that can clean up the messiest jobs just as well (if not better) than industrial chemicals.
  • Citrus formula allows for easy breathing.
FEATURES
  • Environmentally safe & Eco-Friendlier™.
  • Non toxic.
  • Meets all VOC requirements.
  • Biodegradable and drain safe.
  • All-natural soy based formula.
  • Pleasant smelling with a citrus undertone.
  • Powerful enough to remove plastisol and graphic inks.
ON-PRESS USE
  1. Spray or pour a small amount onto screen.
  2. Grab a blue shop towel or rag of choice. Scrub both sides of the screen, re-applying Ink Degrader as needed until the screen is clean. Should always be rinsed with water.
  3. If you plan on cataloging or reusing the screen, you can rinse both sides of the screen clean of any residue with pressured water*. This will also help to remove more of the pigment that can become lodged in the knuckles of the mesh causing it to stain.

*Note: Do this only if your emulsion is water resistant. Otherwise you can see screen image breakdown or softening of the image.

RECIRCULATION USE:

Sgreen® Ink Degrader can also be used in a continuous recirculating unit until product becomes too heavily soiled with solids and ink waste. Used product may then be filtered and reused. Be sure to check with your local sanitation district regarding limitations on ink residue that can be washed into the sewage system and what kind of filtration is needed.

STORAGE INFORMATION

Store away from direct sunlight and heat. Do not freeze.

GENERAL SAFETY PRECAUTIONS
  • Keep out of the reach of children.
  • Do not take internally.
  • Avoid contact with eyes.
  • Wash thoroughly after handling.
FIRST AID:

Eyes: Flush for 15 minutes, seek medical attention if irritation persists.

Swallowed: Drink large quantities of water and get immediate medical attention.

Skin: Wash with soap and water, seek medical attention if irritation occurs.

Inhalation: Remove person to fresh air and keep comfortable for breathing. Call a doctor/physician if you feel unwell.

*** See SDS Sheet for more details

FOR INDUSTRIAL USE ONLY

PRODUCT DATA SHEETS
FREE GROUND SHIPPING (SUPPLIES ONLY)

FREE SHIPPING

All supplies in orders over $275 ship for free. Orders below $275 ship for $15. Orders placed before 3pm local time typically ship the same day.

FLAT RATE SHIPPING

Flat rate shipping charges will be assigned to our Equipment and heavier consumable items. View our entire FREE Shipping Policy

GROUND SHIPPING ZONES

UPS Ground Shipping Zones

If you need clarity on estimated shipping to your area please chat with us or call us at 1-800-314-6390

Sgreen Ink Degrader Plastisol Ink Remover by Franmar Quart | Screenprinting.com
Sgreen

Sgreen Ink Degrader Plastisol Ink Remover

From $26.95

Sgreen® Ink Degrader is an all natural soy based Eco-Friendlier™ plastisol ink degrader, designed to remove difficult inks during your screen cleaning process without affecting the emulsion. It is safe enough to use in your washout sink, washing away difficult inks when mixed with water and agitated with a brush. You can also use Sgreen® Ink Degrader in a recirculation system for the most economic use. Sgreen® Ink Degrader works hard to dissolve plastisol and other difficult inks without harming you or the earth.

CHECK OUT THE SGREEN PRODUCT CATALOG

BENEFITS

FEATURES

ON-PRESS USE

  1. Spray or pour a small amount onto screen.
  2. Grab a blue shop towel or rag of choice. Scrub both sides of the screen, re-applying Ink Degrader as needed until the screen is clean. Should always be rinsed with water.
  3. If you plan on cataloging or reusing the screen, you can rinse both sides of the screen clean of any residue with pressured water*. This will also help to remove more of the pigment that can become lodged in the knuckles of the mesh causing it to stain.

*Note: Do this only if your emulsion is water resistant. Otherwise you can see screen image breakdown or softening of the image.

RECIRCULATION USE:

Sgreen® Ink Degrader can also be used in a continuous recirculating unit until product becomes too heavily soiled with solids and ink waste. Used product may then be filtered and reused. Be sure to check with your local sanitation district regarding limitations on ink residue that can be washed into the sewage system and what kind of filtration is needed.

STORAGE INFORMATION

Store away from direct sunlight and heat. Do not freeze.

GENERAL SAFETY PRECAUTIONS

FIRST AID:

Eyes: Flush for 15 minutes, seek medical attention if irritation persists.

Swallowed: Drink large quantities of water and get immediate medical attention.

Skin: Wash with soap and water, seek medical attention if irritation occurs.

Inhalation: Remove person to fresh air and keep comfortable for breathing. Call a doctor/physician if you feel unwell.

*** See SDS Sheet for more details

FOR INDUSTRIAL USE ONLY

PRODUCT DATA SHEETS

Size

  • Quart
  • Gallon
  • 5 Gallon
  • Drum
View product