Vastex Little Red Conveyor Infrared Dryer X3D-30" 240v (30in)
It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.
The Little Red X3D model is equipped with a 30 in. (76.2 cm) wide conveyor belt and three 24 in. (61 cm) wide infrared heaters (8300W @ 240V total wattage) and can cure 360+ plastisol-printed garments/h, 100+ water-based or discharge-printed garments/h, and up to 50+ garments/h inkjet printed with digital white ink.
With overall conveyor belt length of 88 in. (224 cm) long and 41 in. (104 cm) long heating chamber, the X3D features a powerful 380 cfm (10.7 cmm) targeted exhaust system as standard to rapidly remove moisture and air contaminants from the heating chamber, as well as cool the skin and controls.
Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time
8300W@240V total wattage
Industry-leading 15-year heater warranty
- 360+ garments/hr for plastisol inks
- 100+ garments/hr for water-based or discharge inks
- 51+ garments/hr for DTG digital white ink @ 3 minutes
- 38+ garments/hr for DTG digital white ink @ 4 minutes
*Note- Current lead time may be extended on this product. Please call in to get estimated ship time.
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing
Add 24 in. (61 cm) chambers and/or 18 in. (46 cm) belt extensions
- Additional heating chambers and conveyor belt extensions
- Heavy duty belt motor (recommend for longer conveyor belts)
- Locking casters for mobility
Dryer Profile Settings
Click the link above to view the different profile settings recommended by Vastex