RyOpaque Red Plastisol Ink - Gallon

$40 $84.99   53% Off

SKU: # IKPL-61D-6A-G
$40 $84.99   53% Off
Subscribe to this item » Learn More

Subscription Frequency

RyOpaque inks offer a unique solution for ultimate coverage on dark garments. Formulated to be especially opaque on the shirt, they are designed to eliminate the need for under-basing. RyOpaque ink has maximum coverage while maintaining the same ease and printability of standard inks. With the same formula as our popular Ryonet White, RyOpaque inks will increase production and reduce your ink usage by up to 50%.

Screens must be coated with a plastisol or hybrid emulsion. Post-hardening the stencil is recommended for long print runs. If using with a pigment system, mix in pigment at the desired shade or level. 1-10% is normal for standard pigments and up to 20% for fluorescent pigments. You may mix in Curable Reducer to help thin the ink at a mix ratio of 1-25% by volume. Adding reducers may reduce the opacity of the ink.


Print wet-on-wet without flash curing. Degree of color/wash fastness is dependent on proper curing.


36 to 305t/in. The mesh count being used will determine how much squeegee pressure should be used.


60-80 Durometer. Can also use 70/90/70 triple durometer squeegees. Typically heavy squeegee pressure is preferred.


Use RXP, HiFi or any standard plastisol emulsion.

Cure Instructions

325°F through the entire ink film. Test dryer temperatures before a production run. Wash test printed product prior to beginning production run.

Clean Up

Plastisol Screen Wash such as Citra Paste. You may use mineral spirits sparingly, as it my break down screen adhesive.


H (1) F (1) R (0) P (B)


Store in cool dry place. Elevated temperatures thicken product and shorten useful life.

Compare to: Union Max Opaque Red

No reviews available

Be the first to Write a Review