Wilflex Epic Rio Electric Fluorescent Yellow Plastisol Ink (Mixing Component)
Wilflex Epic Rio Electric Fluorescent Yellow Plastisol Ink is a part of the Epic Rio Mixing System but can also be used for direct print if slightly modified with Fashion Soft Base. The Rio mixing system is a non-phthalate finished ink mixing system formulated for a perfect balance of color accuracy and opacity for peak press performance and color design. It is an easy-to-use, easy-to-mix color mixing system with 18 inter-mixable colors that enable printers to produce accurate PANTONE® simulations. Epic Rio is the most opaque color system in our Epic line. The increased opacity helps printers get to color quicker on press even when using fine mesh screen sizes, saving printers ink and money.
- Accurate and vibrant color match to Pantone.
- Soft hand prints.
- Matte finish.
- Wet-on-wet printing.
- 18 inter-mixable colors.
WILFLEX™ COMPLIANCE INFORMATION
For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print using lower mesh screens. For bleed resistance, use an under base white such as Wilflex Epic Polywhite.
Flash at 220°F (105°C) for 3 - 5 seconds and cure at 300°F (150°C).
Ink degradent or press wash.
Store at 65-90°F (18-32°C), avoiding direct sunlight. Use within one year of manufacturing date.
Wilflex Epic Rio Electric Yellow Plastisol Ink TDS