Green Galaxy Fusion Yellow HSA Water Based Pigment - Quart

$29.99

Earn $2.99/ea in Member Rewards » View details.


SKU: # IKWB-YELLOWAB-Q
$29.99

Earn $2.99/ea in Member Rewards » View details.
» View Availability and Shipping Map
QtyPrice
1-3

4+
$29.99

$24.99




Fuse your own Green Galaxy™ Water Based Inks or refill your Green Galaxy™ Fusion Mixing Kit with this Green Galaxy™ Fusion Mixing Pigment. Using our slick online Pantone® based color mixing program and all 11 Green Galaxy™ Fusion Mixing Pigments, it's now just as easy to mix your own custom water based colors as it is to print them. Ryonet's Green Galaxy™ Fusion pigments have all of the same leading-edge features as our ready-to-print Green Galaxy™ Water Based Inks. With extensive in-screen open times, filter-less mixing, improved viscosity for superior pigment control and print opacity, HSA (High Solids Acrylic), and the flexibility to be used with Warp Drive for use on more versatile printing mediums, we designed the Green Galaxy™ Fusion Pigments for passionate printers. Just add the appropriate amount of pigment to Green Galaxy™ Clear Core and/or Opaque Core bases or your favorite clear discharge base and fuse your own color pallet for your next print!



*Pigments will NOT cure without mixing base.

*See product details for mixing instructions.




Just wanted to say that this Fusion white is awesome. No chunks, no straining needed and the PMS color matches with it are dead on. With your old white pigment the color matches were always off. For instance any Cool Grays with the old pigment I had to sometimes double or even triple the amount of black it called for to get the color to be correct. Not with this new Fusion. Looking forward to using the rest of them once I run out of the old pigments I have.

-ELUSIVE PRINT












General Information:

Ready-to-use water based ink for screen printing on fabrics. Can be printed on polyester or dye migrating fabrics with optional use of Green Galaxy™ Warp Drive low cure catalyst. 



Mesh Guidelines: 


Can be used with any mesh between 156-305.

Stencil/Emulsion Guidelines:

We recommend using either a water resistant emulsion like Green Galaxy™ CryoCoat and degreasing with Green Galaxy™ CryoPrep degreaser. For extended life and long runs it is recommend to post expose the screens or use an emulsion hardener like Ryonet Harden-X.

Mixing instructions:

To access the latest version of the mixing formulas click here.



Green Galaxy™ Fusion Mixing Pigments can be mixed directly into Green Galaxy™ Clear Core Base, however we recommend creating your own base with 80% Clear Core and 20% Opaque Core. Adding 20% Opaque Core to your mix provides more body and better coverage to the ink. If you desire more coverage or body you can add additional Opaque Core to the mixing base, but this will alter the mixing formula slightly and manual tweaks will be necessary to achieve the originally desired Pantone® color.



Green Galaxy™ Fusion Pigment load should not surpass 25% of total ink mixing ratio, with the exception of Green Galaxy™ Fusion White Pigment. Green Galaxy™ Fusion White Pigment is curable but will lead to a heavier hand and more crusted feeling if added in excess.



NOTE: If too much pigment is added to the mixing base it will not cure properly. All mixing formulas found on www.screenprinting.com/fusion have already been appropriately balanced and should not need adjusting if using recommended base. 





Printing Instructions: 

Load screen with plenty of ink. Flood screen prior to printing. Green Galaxy™ HSA Water Based Ink can be printed with a push or pull squeegee stroke. After printing, flood screen allowing ink to sit on top of image to avoid drying. If screen clogs or exhibits dry ink in the print, re-flood and aggressively print again, this should clear the screen. If it does not clear the screen, spray a small amount of warm water into the stuck areas of the screen and wipe out with a rag. If you are leaving your screen for an extended period of time be sure to leave your screen flooded completely. If your ink begins to scale over, spray with water to rewet ink. Green Galaxy™ HSA Water Based Ink can be printed with other water based inks and with plastisol inks.  

Flashing Instructions: 

For flashing, forced air flash is optimal. Flash until dry to the touch. 



Printing on an under base: 

Green Galaxy™ HSA Water Based Ink colors can be printed on top of Green Galaxy™ Comet White, or discharge under base. Ensure that the under base is properly flashed so that it is dry before printing color on top. Perform wash test to ensure inner layer adhesion.

Curing Instructions: 

Printed fabric should be cured for a minimum of 90 seconds at 360°F. Ideally, printed fabric should be cured for three minutes at 300-320°F. 

Testing/Precautions: 

After printing, perform a stretch test to ensure elasticity. It is always recommended to perform a wash test to ensure proper cure prior to going into production. You may also run abrasion testing to watch for flaking and test adhesion. Increase cure dwell time if testing fails.

Clean Up: 

Ink should be removed from screen as soon as printing is completed. General wash-up (on ink that has not dried) can be done with water, though using Sgreen™ Aqua Wash is much easier and recommended. For aggressive or dried screens, use Sgreen™ Aqua Wash to dissolve ink and blast out areas of dried ink with water pressure. 

Storage info:

Keep container(s) tightly closed. Store in cool, well-ventilated location that is locked. 

General Safety Precautions: 

Do not breathe vapors. Wear protective gloves. Do not eat, drink or smoke when using product. Wash hands thoroughly after handling. Dispose of this product in accordance with local, regional, national and international regulations as specified.

No reviews available

Be the first to Write a Review