IC 7500 UltraMix Base Plastisol Ink - 5 Gallon

$255.99   $51.20/gal

SKU: # IKPL-7500LF-5G
$255.99   $51.20/gal
Subscribe to this item » Learn More

Subscription Frequency

IC 7500 Mixing Base is the core component to the 7500 pigment pantone mixing system. Used with IC UltraMix Pigments or other pigments. 

Screens must be coated with a plastisol or hybrid emulsion to prevent stencil breakdown on press. Post-hardening the stencil is recommended for long print runs. You may mix in Curable Reducer to help thin the ink at a mix ratio of 1-25% by volume. Adding reducers may reduce the opacity of the ink.


Print wet-on-wet without flash curing. Degree of color/wash fastness is dependent on proper curing.


156 to 305t/in. The mesh count being used will determine how much squeegee pressure should be used.


60-80 Durometer or 70/90/70 triple durometer. Typically heavy squeegee pressure is preferred.


Use RXP, HiFi or any standard plastisol emulsion.

Cure Instructions

325 F through the entire ink film. Test dryer temperatures before a production run. Wash test printed product prior to beginning production run.

Clean Up

Plastisol Screen Wash such as Citra Paste. You may use mineral spirits sparingly, as it my break down screen adhesive.


H (1) F (1) R (0) P (B)


Store in cool dry place. Elevated temperatures thicken product and shorten useful life.

No reviews available

Be the first to Write a Review