Livingston Syston Hat Champ para imprimir tapas en Riley Hopkins Press
Descripción
¡El Riley Hopkins Compatible Hat Champ le permite imprimir 6 tapas de panel y se ajustará a cualquier prensa! Tenemos 4 placas diferentes disponibles para sus necesidades de impresión de tapa, incluidos: estándar (incluido), perfil bajo, bajo perfil bajo y visera ranurada. El accesorio de visera ranurada le permite imprimir en viseras que son muy cortas en altura. Una ranura a través de la planta mantiene segura una cantidad muy pequeña de material, dejando la mayor parte del material de la visera para imprimir. Las placas son intercambiables, se adhieren y apagan para que pueda imprimir en todo tipo de tapas y viseras. Los platos vienen con dos almohadillas de espuma extraíbles, una con una ranura para facilitar la impresión en las seis tapas de panel cosidas. Compatible con Riley Hopkins, Hopkins, caballo de batalla, gorras y otras prensas con ARM Dims de 3.75 "de ancho x 2.75" de alto.
*The Hat Champ se envía del fabricante en Colorado. Espere 2-3 días para su pedido.
** Vea los elementos recomendados para otras opciones de prensa.
Características:
- Livingston Hat Champ para tapas de impresión de pantalla incluye un sombrero de 6 "x 3 y 3/8"
- Compatible con Riley Hopkins, Hopkins, caballo de batalla, gorras y otras prensas con ARM Dims de 3.75 "de ancho x 2.75" de alto.
- No compatible con Riley 500 Presses.
- Imprime en 6 tapas de panel
- Se adapta a todas las prensas de impresión
- No se requiere adhesivo
- No se requieren pantallas especiales
- Operación rápida
- Capacidades multicolor
- Contiene poplin o espuma y sombreros de bajo perfil
- Sin distorsión
- Video instructivo incluido
El sistema único de tirón y bloqueo de Hat Champ se mantiene lo suficientemente seguro para la impresión multicolor y no se requiere adhesivo. Cuenta con micro-registro en el nivel y la altura.
Se incluye un video instructivo con consejos de impresión útiles.
Tipos de platina
- Estandar (Incluido)
- Perfil bajo (se vende por separado)
- Perfil bajo bajo (se vende por separado)
- Visera ranurada (vendida por separado)
Pago y seguridad
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Frequently Bought Together
- Reviews
- Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
- Hats
- details
- construction
- attention
- prints
Poor design
This product is poorly designed and does NOT work on a structured cap like they state. You might be able to print on a foam hat but that would be it. And they charge a re-stocking fee to return. Do not recommend to anyone, don't waste your money.
Don't waste your time.
Just purchased the hat clamp and am immediately disappointed. The unit isn't consistent, only works with generic foam trucker hats, and even the the clamp creates creases and folds in the hat leaving a product that looks used, or squashed. I tried a few other hats and would rather just out source them or use an embroidery machine to achieve the results I'm looking for. To top it off, they charge you an extra $70 per platen to get the lower profile, and visor platens, which I am sure leave the same inconsistent printing results. NEXT!
Works under strict limited constraints.
I purchased the Hat Champ to print on baseball caps. It has some limitations. The size of the print is limited to a maximum size of 4.75" wide by 2.75" tall. It's not a bad size but it's smaller than you want sometimes. It is also not a great option for structured hats that have a stiffer front panel area as the hat has to flatten completely and wrap around the small platen surface to offer a good flat print surface. This product works well with flexible foam trucker hats and 5-panel soft caps that don't have a seam running down the middle. I sometimes use this product but often, I just burn my screens inverted and print heat transfers to use on a heat press for hats. I paid a bit over $425 for this product and I feel it's expensive given its limitations.
Works great
Just bought this hat champ. There is a little bit of a learning curve when doing tight multi color images on a foam hat. I actually had to simplify the image a little bit so it could actually be printed. But now that I know its limitations it won't be so frustrating. The press prints great and would work really good doing single color images. I would recommended this product
ScreenPrinting.com
Thanks for the feedback Charlie! There definitely is a learning curve to the hat champ but works really well for what it's made for. :)

Well built product
Construction is solid and producing consistent prints is very possible. Hats aren't shirts, so take your time setting up and pay attention to the details and you'll be very happy with this product.