Ready to start using your new Riley Hopkins Flash Unit? First, you'll need to assemble it. These comprehensive instructions provide step-by-step guidance on assembling and setting up both Riley Flash Forced Air Dryer 18"x18", ensuring a seamless and efficient printing workflow.
View the Riley Flash Forced Air Dryer Assembly Manual Here
TOOLS NEEDED
- (x2) 1/2” open end wrench
- (x1) Phillips screwdriver
ASSEMBLY INSTRUCTIONS
Refer to the diagram below and follow the assembly instructions to assemble your new Riley Flash Forced Air Dryer 18"x18".
- Position Heater Head [1] face on flat level surface.
- Install feet [7] to legs [8].
- Install legs [8] to tube [6] with screw [10], bolt [11], & nut [12].
- Install tube [2], collar [3], and bent bolt [4] into tube [6].
- Slide tube [2] up & lock collar [3] to mate with heater head [1] bracket.
- Install knobs [5] & collars [9] through bracket & into upper tube.
- Rotate knob to level heater face to platen.
- Tighten knobs [5] & collars [9] to retain level heater.
