Is getting an automatic press part your plan? Are you not quite ready for it yet, but want to ramp up your shop so it’s ready for an auto? Supercharge your print shop with the Riley Hopkins 350 Screen Printing Full Shop Package.
The cutting-edge shop package helps make a seamless transition to expanding your business to an automatic screen printing shop thanks to its ROQ platen compatibility. Getting a kit makes your life simple. You could pick and choose supplies and equipment, but that takes a lot of time. With a few clicks, you have everything you need to upgrade a print shop.
The shop package has everything you need — a press, flash dryer, exposure unit, conveyor dryer, dunk tank, washout booth, screen rack, screens, squeegees, inks, chemicals, and more. Loaded with top-notch equipment and supplies from brands like Riley Hopkins®, Baselayr®, Sgreen®, and FN-INK™, you can count on producing high quality prints right from the start.
Investing in a shop package is an easy, economical way to revamp a screen printing business. Never take a pit stop again with the Riley Hopkins 350 Screen Printing Full Shop Package today.
INCLUDED IN KIT:
- Ink Kit
- Two gallons of white FN-INK™
- Two gallons of black FN-INK™
- One gallon of bright red FN-INK™
- One gallon of royal blue FN-INK™
- One gallon of kelly green FN-INK™
- One gallon of golden yellow FN-INK™
- One gallon of light royal blue FN-INK™
- One gallon of lemon yellow FN-INK™
- One gallon of fuchsia FN-INK™
- One gallon of orange FN-INK™
- One gallon of violet FN-INK™
- One gallon of navy blue FN-INK™
- One gallon of ruby red FN-INK™
- A quart of pitch black Green Galaxy Water-Based Ink
- A quart of neptune blue Green Galaxy Water-Based Ink
- Supply Kit
- Six 23”x31” Baselayr 110 White Mesh Aluminum Screens
- Six 23”x31” Baselayr 156 White Mesh Aluminum Screens
- Six 23”x31” Baselayr 230 Yellow Mesh Aluminum Screens
- Six 23”x31” Baselayr 305 Yellow Mesh Aluminum Screens
- Eight 15” squeegees with 70 durometer
- Eight 12” squeegees with 70 durometer
- Four 8” squeegees with 70 durometer
- Four 6” squeegees with 70 durometer
- 19” scoop coater
- 16” scoop coater
- One roll of 18”x100yd FN-INK™ Standard Platen Tape
- Digital Temperature Gun
- 1 roll of 17”x100' Baselayr Waterproof Film
- 3 rolls of 2”x36yd green screen blockout tape
- 2 rolls of 2”x110yd white screen tape
- Pantone Color Formula Guide
- Digital lab scale
- 300 pack of Cleanup Cards
- Ten 25-sheet packs of Black Test Pellons
- Ten 25-sheet packs of White Test Pellons
- 15 goop scoops
- 2 light safe bulbs
- Chemical Kit
- A gallon of Baselayr Long Lasting Emulsion
- One gallon of Sgreen Supreme Wash
- One gallon of Sgreen Aqua Wash
- One gallon of Sgreen Stuff Degreaser/Dehazer
- Four gallons of Sgreen Emulsion Stripper
- A quart of Sgreen Water-Based Pallet Adhesive
- A quart of Red Coat Screen Blockout
- Spot Gun and a quart of Cured Ink Remover
- 50 screen printing towels
- 3 cleaning brushes
PRESS FEATURES AND SPECS:
- Sturdy, heavy-duty, lightweight construction.
- XYZ Micro Registration
- Tool-Free Adjustments
- Honeycomb Pallets
- Adjustable Height Mechanism
- 2-Point Roller Gates
-
Diameter: 103"
-
Base Size: 57"
-
Platen Height: 35.5" - 36.5"
-
Platen Size: 16"x 24"
-
Max Platen Size: 24" x 32"
-
Min Frame Size: 23" x 31"
-
Max Frame Size: 25" x 36"
-
Max Frame Size(every other): 42" x 48"
-
Color/ Stations: 8 color / 6 station
CONVEYOR DRYER FEATURES AND SPECS:
- Cool outer surface area
- Adjustable conveyor lengths
- Digital belt speed control
- Three on/off switches (one for dryer, belt speed, and temperature control)
- Digital temperature control
- Two heating zones, first zone flashes while second zone holds ink at cure temp
- Belt extensions in two-foot increments
- Hard wired
- Length Standard: 96”
- Width: 36”
- Belt Width: 24 inches
- Belt Drive Power: Single Point Power
- Number of Elements: 3
- Heater dimensions: 12”x24”
- Chamber Length: 48”
- Chamber Height: 5”
- Entry/Exit Length: 24”, 24”
- Capacity: Plastisol-350, Water-Based-200, DTG-60
- Wattage: 12000
- Voltage: 240
- Amps: 50
- Plug Type: Hard Wired
FLASH DRYER FEATURES AND SPECS:
- Rotating, adjustable stand
- Locking casters
- Tilt control
- Temperature control
- On/off switch
- 360° rotation
- Powder-coated to prevent rust
- Sturdy, simple design
- 10-foot power cord
- Easy assembly
- Watts: 3233
- Volts: 240
- Amps: 13.5
- Heater Size: 18”x28”
- Element Size: 18”x24”
- Plug Type: Nema 6-20P
EXPOSURE UNIT FEATURES AND SPECS:
- Vacuum pump achieves positive contact in 20-30 seconds
- Vacuum lid creates the tightest positive contact between the light source, glass, film, and emulsion that produces stencils with clean, sharp edges
- LED light sources exposes screens rapidly compared to UV bulbs
- LED enhances the amount/levels of possible details captured compared to UV bulbs
- LED creates a harder, more durable stencil, providing better on-press longevity
- Doubles as an inspection table and exposure unit
- Low power consumption
- LED bulbs last more than 10,000 hours, so you don’t have to replace them as often
-
Unit Dimensions: 36.5"(W) x 43.5" (L) x 37" (H)
-
Optical Clear Tempered Glass: 40.25" x 32.75"
-
Max Exposure Area: 32" x 39"
-
Max Frame Size OD: 25x36
-
Light Safe Inspection Bulbs: 2 rows of Amber LEDs
-
Single Point Light Source: 405nm LED array designed for exposure units
-
UV Wattage: 450 watt
-
Voltage: 115v - 240v
- Standard 110v 3-prong plug
-
Timer: Android® App, (M.S.mS)
WASHOUT BOOTH FEATURES AND SPECS:
- Rustproof stainless steel basin
- Sturdy corrosion-resistant aluminum legs and side
- Translucent back-splash for back-lighting
- Back-light attachment with easy on/off side access and water resistant fittings
- 1-1/2" Female nominal pipe thread drain (AKA 1-1/2 NPT)
- 48” W x 25” D x 74” H
- 113 lbs
SCREEN RACK FEATURES AND SPECS:
- Holds 20: 20 x 24 inch or 23 x 32 inch screens
- Riley green powder coated cross bars.
- Lightweight aluminum screen slats.
- Removable 2" wheel locking casters with 3/8" coarse thread stud.
-
Assembled Dimensions: 26.5" W x 28" D x 60" High
-
Actual Weight: 53.5 lbs.
NOTES ON SHIPPING
This package ships in 10-12 boxes and three crates. The supplies and equipment may ship from separate locations and might arrive at different times, depending on stock. This package can only ship UPS/FedEx Ground because of the weight and chemicals.