Skip to content

Ryo Flash Dryer with Stand and Casters - 16x16in, 1600 Watt, 15 amp

by Ryonet
17 reviews
$425.00
SKU FDIF-EF-1600

The RyoFlash is a great quality affordable flash dryer. This 16" x 16" version features almost 1600 watts of power. The flash dryer is simply and effectively constructed to ensure the least amount of problems and the longest lifespan. It has a 10 foot power cord with plug, stand and casters for easy maneuverability around the shop.

This low cost setup satisfies the basic requirements for start ups or can serve as a backup system. The RyoFlash does not have an indicator light or on/off switch. However, it usually warms up in about 10-15 minutes and you can easily tell if its on or off by simply feeling under the flash for warmth. Also a heavy-duty power strip can be added easily to suffice as an on/off switch.

Product Specs

  • 16" x 16" 120V, 1575W, 13.3 amps infrared element
  • Rotating and adjustable stand
  • Sturdy design with powder coated housing to prevent rust
  • Locking casters
  • Simple design
  • Easy assembly
  • UL certified components
  • Runs off any 15amp circuit
  • 1 year warranty
  • Plug: NEMA 5-15P(Standard Outlet)

Most flash dryers in this price range use coil elements like you would see in an oven. An infrared element uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area. A coil element only emits heat from one coil so you have very hot spots and very cool spots, which doesn't result in a constant cure.

With fewer parts there are fewer things to go wrong. The RyoFlash doesn't have an on/off switch, but can easily be plugged into the wall or hooked up to an industrial power strip to turn on and off. There is some assembly required, but with a few bolts you have a flash that's ready to be put to work. If a one year warranty seams short, picture this: the element used in this flash dryer is the same element used it BBC's high end series. These elements have been used in thousands of shops throughout the world; the quality and longevity speaks for itself and dwarfs any manufacturer's warranty!

Customer Reviews
3.9 Based on 17 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
J
02/23/2019
John
Not impressed!

Ryo Flash Dryer with Stand and Casters - 16x16in, 1600 Watt, 15 amp The flash is very small and does not fit the whole housing of the flash unit so your constantly checking to make sure your covering the element with the top of the design. If your printing a youth small design great but is a pain on larger designs. Not having an on/off switch or a power light was not a great idea. The panel works good just those two issues make it not a worth while purchase for me.

LC
05/21/2020
Luis C.
United States United States
ITS OKAY

ORDERED THIS AND I THINK I WAS BETTER OFF GOING TO AMAZON AND GETTING A CHEAPER ONE. THIS FLASH DRYER DOESN'T COME WITH A ON/OFF SWITCH. ALSO WAS MISSING IMPORTANT BOLTS THAT HOLDS THE DRYERS COVER. I HAD TO GO OUT MY WAY TO BUY THE BOLTS AT THE HARDWARE STORE. FOR THE $500.00 THAT I SPENT I FEEL LIKE WE SHOULD OF GOTTEN SOMETHING BETTER THEN THIS.

CB
10/05/2017
Chad B.
It works good but I have a problem with the paint they used.

I got the flash dryer with the entrepreneur kit. After 8 months it still work good curing the shirts. After the first month I noticed green ink on my shirts. I haven't ever used the green ink. I figured out the paint was dripping of because of the heat. They need to use a heat resting paint. If you buy this plan on sanding the paint off the bottom I used 60 grit in a palm sander

RJ
07/06/2020
robert j.
United States United States
Flash ahhhha. Ruler of the universe!

Obviously entry level. But a piece of quality equipment. Easy assembly. Works as it should. I was happy to find a flash that runs on regular house 15amp.

07/06/2020
ScreenPrinting.com

Thank you for the *Flash* Back to an awesome movie and fantastic soundtrack! Glad you love the flash unit!

A
11/02/2017
Amy
Paint not heat resistant

I use this flash for our on site mobile printing unit. It's a great flash and it would have gotten five starts from me but we found out the hard way that the paint on the unit is not heat resistant. We followed what another individual did and sanded the bottom to elevate the problem but on something made to create heat, you would have though this was taken into consideration. Still a great flash though. Buying another actually, but we'll sand this one as well.