Sgreen Ink Degrader Plastisol Ink Remover
Shipping Transit Time
Availability is based on available stock info, and may be affected by order volumes.
Sgreen® Ink Degrader is an all natural soy based plastisol ink degrader, designed to remove difficult inks during your washout process without affecting the emulsion. It is safe enough to use in your washout sink, washing away difficult inks when mixed with water and agitating with a brush. You can also use Sgreen® Ink Degrader in a recirculation system for the most economic use. Sgreen® Ink Degrader works hard to dissolve plastisol and other difficult inks without harming you or the earth.
- Environmentally safe.
- Non toxic.
- No VOC (Volatile Organic Compound).
- Biodegradable/drain safe.
- All-natural soy based formula.
- Pleasant smelling.
- Powerful enough to remove plastisol and graphic inks.
- Card off ink from screen.
- Apply to both sides of screen with spray bottle.
- Scrub screen with non-abrasive scrub pad.
- Rinse until residual ink is washed away.
Sgreen® Ink Degrader can also be used in a continuous recirculating unit until product becomes too heavily soiled with solids and ink waste. Used product may then be filtered and reused. Be sure to check with your local sanitation district regarding limitations on ink residue that can be washed into the sewage system and what kind of filtration is needed
Store away from direct sunlight and heat. Do not freeze.
General Safety Precautions:
Keep out of reach of children. Do not take internally. Avoid contact with eyes. Wash thoroughly after handling. FIRST AID: Eyes: Flush for 15 minutes, seek medical attention if irritation persists. Swallowed: Drink large quantities of water and get immediate medical attention. Skin: Wash with soap and water, seek medical attention if irritation occurs. FOR INDUSTRIAL USE ONLY: Store away from direct sunlight and heat. Do not freeze. Water based, no phosphates, biodegradable.