Introducing The Rudy Press for Side Clamp Screen Printing Presses

Introducing The Rudy Press for Side Clamp Screen Printing Presses  | Screenprinting.com

Ryonet Team |

Since The Rudy Press first launched, one question has topped the list from pro printers running side clamp presses, and that wait is officially over. Meet the highly anticipated Rudy Press Side Clamp Squeegee and Flood Bar Attachment (23x31in), a brand-new Rudy Press built specifically for side clamp manual presses using 23x31 inch frames.

This new Rudy Press mounts the sliding rails inside the screen perimeter, letting the carriage roll freely between your side clamps. Watch Ryan walk through the internal rail setup on press and clear thick white ink like butter in the video below.

KEY TAKEAWAYS

  • A Rudy Press That Fits Side Clamps. Built specifically for side clamp manual presses, this new Rudy Press mounts inside your screen perimeter so your clamps lock onto the frame cleanly.
  • 23x31 Inch Frame Format. Internal rail mounting gives you 15 inches of inside clearance, pairing with the included 14-inch squeegee and 14-inch flood bar.
  • Swappable Blade Sizes. Run the included 14-inch blades for full-size prints, or drop in 12-inch and 8-inch blades for youth tees and sleeve jobs.
  • Auto-Style Stroke Consistency. Guided mechanical pressure delivers even ink deposits across every print run, from multi-color spot jobs to heavy white plastisol on thick hoodies.
  • Quick Bungee Trick. If your print head needs a touch more upward resistance with the unit mounted, hook on a bungee cord to keep it balanced.

HOW THE INTERNAL RAIL SYSTEM FITS YOUR SIDE CLAMP SETUP

Overhead view of The Rudy Press Side Clamp attachment internal rails mounted inside a 23x31 inch aluminum screen frame

To keep your outer frame rails wide open for side clamps, this new Rudy Press shifts the carriage rails inside the screen frame. Support bars sit underneath each rail and upside-down back clamps lock the unit in place, giving the carriage a smooth track right inside the open mesh area.

Ryan Moor checking head clearance and internal rail mounting on The Rudy Press Side Clamp attachment in a 23x31 frame

The rail assembly sits about 1-1/4 inches above your frame. Before you lock in registration, check your head clearance and slide your 23x31 inch screen slightly forward in the clamps if you need extra room for the rear assembly.

WHY IT IS BUILT FOR 23X31 INCH FRAMES AND 14-INCH BLADES

Ryan Moor running The Rudy Press Side Clamp attachment with a 14-inch squeegee inside a 23x31 inch aluminum screen frame

Mounting rails inside a 20x24 inch screen would squeeze your squeegee down to 12 inches or less. Building this new unit for 23x31 inch frames gives you 15 inches of internal rail clearance, letting you run a full 14-inch squeegee and flood bar accessory right out of the box.

Whenever a job calls for smaller placements, swap in a 12-inch or 8-inch squeegee and flood bar on that same 23x31 inch frame to knock out youth tees, chest hits, or sleeve prints without tearing down your press setup.

Specification Side Clamp Rudy Press Details
Required Frame Size 23x31 inch aluminum screen frames
Internal Rail Clearance 15 inches inside frame perimeter
Included Squeegee and Flood Bar 14-inch squeegee and 14-inch flood bar
Compatible Smaller Blades 12-inch and 8-inch blades for youth and sleeve prints
Rail Height Above Frame Approximately 1-1/4 inches

PULL AUTO-CONSISTENT PRINTS ON EVERY GARMENT

Printer pulling an auto-consistent white ink stroke with The Rudy Press Side Clamp attachment on a Riley Hopkins press

Whether you are running multi-color spot jobs, thick fleece hoodies, or high-opacity white underbases, you will feel the payoff on your first stroke. Pairing the attachment with a triple durometer blade lets you apply firm, even downward pressure without flexing the blade edge, clearing heavy white plastisol and everyday inks cleanly in one smooth pass.

Pulling large prints across heavy garments or long production runs by hand wears out your shoulders fast and makes uniform ink deposits tough to hold. Dialing in your squeegee angle and pressure on The Rudy Press puts automatic-press consistency right in your hands, so every garment in the stack prints like butter.

PRO TIP FOR EXTRA PRINT HEAD RESISTANCE

On Riley Hopkins manual presses, standard head springs hold the weight of the new Rudy Press with zero extra hardware.

If your side clamp press head feels a little heavy or wants to drift down with the attachment mounted, hook a bungee cord between the print head and the upper press frame. That quick shop hack adds upward tension, keeps the head up cleanly between garments, and balances out your print stroke.

GET THE NEW SIDE CLAMP RUDY PRESS ON YOUR PRESS

Load up your 23x31 inch frames with the new Rudy Press Side Clamp Attachment and pull auto-consistent prints across every ink and garment in your shop.

SHOP NEW SIDE CLAMP RUDY PRESS
SHOP ALL RUDY PRESS ATTACHMENTS