Ready to kickstart your screen printing career into high gear? Start your screen printing business today with the Riley Hopkins 300 Enhanced Screen Printing Kit.
Getting a kit makes your life simple. You could pick and choose supplies and equipment, but that takes a lot of time. With a few clicks, you have everything you need to start a print shop.
The kit has everything you need — a press, flash dryer, exposure unit, washout booth, screens, squeegees, inks, chemicals, and more. Loaded with top-notch equipment and supplies from brands like Riley Hopkins®, Baselayr®, Sgreen®, and FN-INK™, you can count on producing high quality prints right from the start.
Investing in a shop package is an easy, economical way to start up or upgrade a screen printing business. Jumpstart your print shop today with the Riley Hopkins 300 Enhanced Screen Printing Kit.
INCLUDED IN KIT:
- Supply Kit
- Four 15" squeegees
- Four 12" squeegees
- Four 8" squeegees
- Eight 20”x24" Baselayr 156 Mesh Aluminum Screens
- Eight 20”x24" Baselayr 110 Mesh Aluminum Screens
- 16" emulsion scoop coater
- 300 Ultimate Cleanup cards
- 100 pack of 13”x19” Baselayr Waterproof Film
- 2 rolls 2”x36 yd green screen tape
- 1 roll of 16"x100 yd FN-INK™ Premium Platen Tape
- 6 Goop Scoops
- Chemical Kit
- A gallon of Baselayr Long Lasting Emulsion
- A gallon of Sgreen Supreme Wash
- A gallon of Sgreen Aqua Wash
- A gallon of Sgreen Emulsion Stripper
- A quart of Sgreen Water-Based Pallet Adhesive
- A quart of Sgreen Stuff Dehazer/Degreaser
- A quart of Red Coat Blockout
- 4 scrub brushes
PRESS FEATURES AND SPECS:
- Sturdy, heavy duty, lightweight construction
- XYZ micro registration
- Anti-flip registration plate for maintaining off-contact and tilt
- Adjustable height mechanism
- Locking levers to secure registration
- Larger screen clamps
- 2-Point roller gates
- Heavy duty springs
-
Diameter: 88"
-
Base Size: 57"
-
Platen Height: 35.5" - 38.5"
-
Platen Size: 16"x 18"
-
Max Platen Size: 24" x 32"
-
Max Frame Size: 25" x 36"
-
Max Frame Size(every other): 42" x 48"
-
Color/Stations: 4 color, 4 station
EXPOSURE UNIT FEATURES AND SPECS:
- Thick, aluminum compression lid with center stiffening rib
- LED 405nm bulb technology
- Durable, powder-coated, steel construction
- IEC power cord port with an easy-to-access on/off switch
- Gas shocks hold the lid in open position 80LB shock
- Optically clear, strong, tempered glass
- Includes a two-inch foam pad for easy, on-contact exposing
-
Unit dimensions: 27”(W) x 40”(L) x 9”(H)
-
Optical clear glass: 25” x 36 ⅜”
-
Max OD frame size: 25" x 36"
- 7 T8 LED 405nm tube bulbs designed for screen exposure
-
UV wattage: 280 watts
-
Voltage: 115v (standard household current)
- On/off functionality
- Standard 110v 3-prong plug
FLASH DRYER FEATURES AND SPECS:
- Rotating, adjustable stand
- Locking casters
- 360° rotation
- Powder-coated to prevent rust
- Sturdy, simple design
- 10-foot power cord
- Easy assembly
- Watts: 1600
- Volts: 120v
- Amps: 13.2
- Heater Size: 16”x20”
- Element Size: 16”x16”
- Plug Type: NEMA 5-15P
WASHOUT BOOTH FEATURES AND SPECS:
- Dimensions: 33”W x 24”D x 63”H
- Easy-to-add backlighting
- Stainless steel basin
- Aluminum siding
- Rubber-protected edges
- Sturdy structure
- Easy cleanup
- Low maintenance
- Minimal space requirement
- Easy to assemble
- Effortless disassembly for transport
- Drain size: 1-½" Female nominal pipe thread drain (AKA 1-½ NPT)
- Maximum frame size is 23x31 (this will allow 4-5 inches on either side)
NOTES ON SHIPPING
This package ships in 6-9 boxes and one crate. The supplies and equipment may ship from separate locations and might arrive at different times, depending on stock. This package can only ship UPS/FedEx Ground because of the weight and chemicals.
United States