- Doubles as a ready-to-use plastisol ink and as an ink mixing system.
- Its low cure property speeds up production while decreasing electrical costs.
- The ink has high opacity, producing bright, vivid prints while maintaining a soft-hand feel.
FN-INK™ helps screen printers that don’t have a lot of extra time or money get the most effective and economical plastisol inks, bolstering productivity and saving money in the process.
FN-INK™ is a non-phthalate, ready to use plastisol ink that works great right out of the bucket, and is not a big financial hit to the ole wallet. FN-INK™ was designed by screen printers, for screen printers to be easy to work with. The FN-INK™ line includes 15-ready-to-use colors.
The fact that FN-INK™ easily cures at lower temperatures (260 degrees), means shops can see real gains in production. Financially Necessary Ink was manufactured to be a great ink at a great retail price, day in and day out. Giving printers the peace of mind that their hard earned dollars are getting the best ROI with this FN-INK™.
Did you know that the classic line makes up the FN-INK™ Mixing System? Browse the mixing software to see what colors you can unlock.
- Bold and vibrant colors.
- Creamy & Easy to Print Inks.
- Soft hand prints.
- Limited wet-on-wet printing.
- Short flash times, lower cure temperature.
For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print using lower mesh screens.
Flash at 180-200°F, for 3 - 5 seconds. Each shop’s operating parameters might be faster or shorter depending on your production variable. Cure at 260°F, the ink is cured when it hits 260 throughout the entirety of the ink layer.
If you are able to keep temperatures low in your dryer and hit cure temp* closer to 260°, you can keep the dyes in the polyester fabrics from bleeding into your inks. To briefly summarize why this happens, most polyester fabric’s dye/temperature is set between 270°-300°. When the polyester thread hits the temperature range again, the dyes return to a gaseous state and are absorbed by the plastisol inks. This is why there are low bleed inks on the market.
But as stated above, if you can cure your ink below the bleed point of the polythread, you do not have to worry about dye migration!
*Cure is attained when the ENTIRE ink layer reaches 260°, meaning that the ink is 260° from the top to the bottom of the ink layer. If you are using a laser gun to read the surface temp, this WILL be misleading. Laser temp guns give you a reflective reading. When tested side-by-side with a donut probe, you will see temperature differences as great as 120°-150° early in the cure cycle (the donut probe accurately measures the contact temperature where the crosshairs reside). As you reach the end of the dryer, those temperatures will get closer together. As a direct result – you will need to read a surface temp as little as 60° above what stated cure temp is and as much as 100° depending on how short your dryer tunnel is and how hot your settings are. This is due to a few things:
- The rate that plastisol ink absorbs heat. Some colors will heat up faster than others as they absorb infrared heat waves more readily.
- How hot the ink is when entering the tunnel. Cooler inks will take longer to heat up, thus taking longer to reach cure.
- The thickness of your ink deposit. As we all know, thicker ink deposits take longer to cure than thinner ink deposits. A longer dwell time is needed to reach full-cure through the whole ink layer. Heat/IR waves take time to penetrate and heat up the ink.
- The length of your tunnel. Curing ink is about temperature and time. It takes time for the entire ink layer to heat up and reach cure temp. The faster and hotter you run, the greater your chance to not reach full cure temp at the bottom of the ink layer.
- Cotton garments take longer to heat up compared to polyblends or 100% polyester. This is due to the absorptive nature of cotton. Cotton soaks up and holds onto water. When putting the shirt through the dryer, the dryer will release the water in the cotton fibers, slowing down how fast ink heats up. This process directly relates to how water based ink heats up and reaches cure, just on a smaller scale.
- The quality of your infrared panels. IR Panels are not created equal. Without diving into the deep details, some panels are more efficient in creating heat within the ink layer than others.
When changing your dryer to low cure temps, follow the recommendations and parameters laid out above and do wash testing to ensure your new dryer settings are reaching full cure.
Ink degradent or press wash.
Store at 65-90°F (18-32°C), avoiding direct sunlight. Ideal when used within one year of manufacturing date.
Payment & Security
Frequently Bought Together
It’s a creamy white and has a smooth feel to it when printing , this is the first time we used it at the shop but I was very happy with it. I did use some curable reducer with it. We will continue to use and see how it holds up over time.
Right on Daniel! We're happy to hear that you're loving the FN-Ink. Thanks for leaving a review! -Ronald 1-800-314-6390
Got free shipping
My purchase decision was done because of free shipping. The FN ink was really nice. Please offer more free or reduced price of $9.95 for shipping like other printing supply stores. Also please offer will call pick ups. Sometimes we need your products super fast where being able to pick it up our selves would be a great thing. I'd rather spend $20 on your product not on shipping. Hope to see some of these wishes and you'll have more business from me. Thanks guys
Why Pay More?!
Great addition to the ink offerings from Ryonet. Thanks for helping us power the print and save $. This ink is just what smaller print shops need!
That's what I'm saying! WHY?! Thanks for leaving your review - we're happy FN White is working well for you! -Ronald
F N Great Ink!!! Easy to work with
So I tried it because I saw a video via IG and saw it wasn't a thick white ink. Ordered it, put it to the test and it worked wonderfully. I noticed that it goes on thin even on a 156 mesh. Easy to work with, and not much stirring needed to get it creamy. It almost feels like it has a reducer in it. It also has a soft hand after curing. I'm impressed and I've tried a lot of white inks and I think this one is the best so far. And Ryonet didn't pay me to say that. I wish they would (hint, hint lol), but they've been good to me these past couple of years. Definitely buy it, it's not expensive at all, and put it to the test, I guarantee you will like it. Thanks again Ryonet for putting out quality goods!
This ink worked exactly like plastisol ink should. It has a good consistency and nice coverage. I was impressed with it on my first use. I was printing on black sweatshirts and white laid down nicely. Satisfied customer.