Skip to content

News

RSS
  • ryonet eco dunk tank and strip solution
    July 22, 2020 Sage Larson

    The Woes of Reclaiming Screens Disappear with a Dunk Tank

    What if I told you that there's a way to make reclaiming undemanding? A method that could remove the dread when it's time to reclaim screens, the hours spent in the washout booth, and the ache of sore muscles from all the scrubbing? The Dunk Tank (also known as a Dip Tank) streamlines the reclaiming process effortlessly and painlessly. 
    Read now
  • sgreen ink degrader, supreme wash, and aqua wash
    July 16, 2020 Sage Larson

    How to Do Eco-Friendly Screen Printing

    Let’s face it. Screen printing is dirty, messy, and toxic at times. From the chemicals, garment manufacturers, chemical waste, to water pollution, screen printing has a long road ahead to becoming eco-friendly. Implementing greener practices seems challenging and expensive, but that’s not the case. 

    Our choices matter. Let’s look at ways screen printers can implement environmentally friendly products and processes in their shops. 

    Read now
  • person scooping out green FN-INK out of its container
    July 15, 2020 Sage Larson

    How to Achieve Soft-Hand Prints Using Plastisol Ink

    Want soft-hand prints? Print with water-based inks. 

    Well, water-based printing isn't accessible to every printer. Luckily, there are some things you can do to make your plastisol prints softer. Between the inks you choose to use, the garments you're printing on, and to the available ink additives, achieving soft plastisol prints is possible. Let's take a look to see how to accomplish this goal. 

    Read now
  • a screen printed heat transfer on press
    July 10, 2020 Sage Larson

    How To Screen Print With Plastisol Heat Transfers

    Screen printing heat transfers can seem daunting but in reality, it’s actually fairly simple. If made properly, plastisol heat transfers can last almost as long as a screen prints and can be much easier to apply in certain scenarios. Here are a few ways screen printing your own transfers can help your business.
    Read now
  • States Issue Requirements for Businesses and Individuals to Wear Face Coverings
    July 1, 2020 Sage Larson

    States Issue Requirements for Businesses and Individuals to Wear Face Coverings

    Unfortunately, the number of coronavirus cases is rising. As the country grapples the situation, each state has taken the matter into their own hands. Some have delayed reopening plans while others have shut down their state again. In order to lower the amount of cases, states have issued requirements or recommendations about wearing face coverings.
    Read now
  • the infrared bulbs on a flash unit
    June 26, 2020 Sage Larson

    Ensuring Proper Ink Curing

    Curing your prints is one of the last steps of the screen printing process, but it is one of the most important steps. Ink needs to be cured properly so it sets into the garment. If the ink does not cure fully, it will crack, fall apart, and not last for long. Printers use either heat guns, heat pressesflash dryers, or conveyor dryers to cure inks. Let's take a look at how each curing device works.
    Read now